紐曼蒂克先導式電磁閥,ASCO產品系列適用介質:氣體、液體介質溫度:-200~+350℃介質粘度:小于50CSt(大于時需定制)防護性能:IP65閥門材質:304、316 、316SS、316L控制方式:常開、常閉

紐曼蒂克先導式電磁閥,ASCO產品系列
特殊材質 - 以下的隔膜可
被取代的換能器體材料的鋁，
黃銅，聚酯和不銹鋼。如需訂購，替換
下面材料代碼，在換能器的第七位數(shù)字
目錄編號，例如，一個可選氟橡膠膜片TF10A11
壓力緩沖器 - 壓力緩沖器（1/4“NPTF
1/4“NPTM）安裝在傳感器壓力連接
會挫傷壓力尖峰值不會
造成損壞。它包括與身體的多孔金屬盤
的不銹鋼，通過該流體通過。如需訂購，
選擇一個緩沖與流體兼容。可通過
單獨的目錄編號（見下表）。
Oxygen Cleaning – Pressure transducers for oxygen service
should be specially cleaned. They are degreased and blacklight
inspected, then assembled in a clean area and tested with
oil-free air or nitrogen. Use metal body transducer with viton or
neoprene diaphragm and add suffix “H” to transducer catalog
number, e.g., TA40A13 becomes TA40A13 H .
Process Connection – A female process connection (1/4”
NPT) is standard on all pressure transducers. A 1/2” NPT is
available as an option on gauge pressure transducers. To
order, add suffix “B” to transducer catalog number, e.g.,
RF10A21 becomes RF10A21 B .
紐曼蒂克先導式電磁閥,ASCO產品系列
Note: Not available on nylon transducers.
Armored Capillaries – Double braided copper armor is
standard for copper capillary units. Stainless steel spiral
interlocked armor is available for stainless steel capillary
units. Add suffix “C” to transducer catalog number.
Thermal Well – Use with direct or remote sensors for
protecting sensing bulb. This allows removal of bulb while
maintaining a pressure-tight vessel. Available in 1/2” NPT or 3/4”
NPT process connection in brass or 316 SS. Dimensions are in
accordance with SAMA Std. RC17-9. Standard “U” dimension
(insertion length) is 2-1/2” for direct mount and 6’ capillary units
and is 4-1/2” for 12’ capillary units.
Longer Capillaries – Standard copper and stainless steel
capillary units can be furnished in 12’ lengths. To order, add
suffix “D” to transducer catalog number.
Consult ASCO for longer length capillaries.
union Connector – For use with remote units for mounting
of bulb in fluid being controlled. Available in 1/2” NPT and
3/4” NPT process connections in brass or 316 SS.

紐曼蒂克先導式電磁閥,ASCO產品系列